RADIAL TONEBONE HOT BRITISH

Hello, today I want to talk about the Radial Tonebone Hot British tube overdrive pedal. While there are so many tube overdrive pedals out there in the market, apparently there are only a few that sound really good. This pedal happens to be one of them. Let's check it out.

The Spec
It contains a 12AX7 tube inside that produces most of the overdrive sound. There are so many knobs; a knob to control the output level, treble knob, bass knob, contour knob, drive and three voicing switches that controls the top end, the overall voicing and mid boost. Each of the switches had three different options, so you pretty much get wide variety of overdrive tone.

It comes with 15V adapter with more than enough power to accommodate the 12AX7 tube. It's also true bypass so if you turn it off it won't suck some power from your tone. The manual provides some helpful example settings that you can use as a starting point before you tweak the pedals.

The Sound
Extremely killer, life changer!!! This pedal can be used as your dedicated lead/crunch channel without changing your amp's channel. I used this pedal only on the clean channel of my amp and it does a wonderful job of providing high amount of gain to the amp. The knobs are extremely sensitive and they do provide so many options of tone that you can use to create whatever overdrive sound you have in your mind.

Turn the drive knob all the way down, the pedal will deliver you a hot Tube Screamer-ish kind of overdrive level, while turning it all the way up will deliver a super high gain Mesa Boogie lead distortion sound. It takes other overdrive pedals pretty well in front of it such as Tube Screamer or BB Preamp to add extra grit to your sound.

The Application
I highly recommend this pedal to those who only had single channel tube amplifier or an amp with bad sounding overdrive channel and needs to have a natural sounding amp-like overdrive that comes in a form of a pedal.

You can also use this on an overdrive amp that doesn't have an effects loop for your delay pedals. Set the amp clean, put the pedal in front of your delay pedal and you can have a natural sounding delays without the need of having FX loop.

I, however, do not recommend this pedal if you are going to use this on a solid state amp, I tried it with an Ibanez 5 Watt amp and it sounds like a total piece of garbage. Also, if you want to use it to boost a tube amp with a great overdrive channel, this might not going to impress you that much(although it can and it sounds good) because you can get a very decent overdrive pedal that sounds as good for cheaper price.

The Maintenance
Tube needs to be replaced once every few years depending on how often it's being used. Also, you have to let the tube warm up before you can switch it on, meaning that it has to be off when the power supply is connected and you have to wait for like 3 minutes or so to prolong the tube life.

Is it worth the money?
$230 is the normal price on the market, you can get it very close to $200 on some stores. I say this is worth it if it's applied the right way(see "The Application" above).

From 0 to 10
Obviously 10.

Sound Clips
Andy Timmons Tube Driver style overdrive
John Petrucci Mesa Boogie Mark style distortion
Warm Tube Screamer-ish overdrive

Hope you enjoy the post, cheers and God bless :)