MY CURRENT PEDALBOARD

Hello everyone, I want to share my current pedalboard that I use for practicing, recording and experimenting. It's actually a bit too big for me to carry during a gig, so I mainly use it only at home and I connect it with my Mesa Transatlantic TA-30 amplifier.

Signal Path
From guitar to Mesa TA-30 amp:
Boss GE-7 Equalizer, CAE MC404 Wah, EHX Micro POG, TC Polytune, EHX Doctor Q Envelope Filter, MXR Dyna Comp, EHX Worm, Ibanez AF-2 Airplane Flanger, Maxon OD9 Silvermod, Radial Tonebone Hot British, RC Booster, Morley Volume Plus.

On the FX Loop:
Boss DD-3, EHX Deluxe Memory Man.

Most of the pedals are powered by the 9V Visual Sound One Spot with the exceptions of Radial Tonebone, Deluxe Memory Man and EHX Worm.

Philosophy of my pedalboard
The general idea of this pedalboard is to be able to cover all kinds of popular effects that you usually hear on any guitar oriented music. Doctor Q can do some envelope filter funk songs, while Worm can deliver phaser,  trem and vibrato. On the other hand, OD9 can deliver some bluesy low gain overdrive tone while the Hot British can be cranked up to a very high gain John Petrucci crunch tone. The RC Booster acts as a transparent volume boost, more like a master volume rather than a gain box. MC404 wah can give you either a bright funky wah tone or a warm lead waht tone with a flick of a switch. Deluxe Memory Man will give you a rich dark analog delay tone while the DD-3 can cover more straight forward digital delay tone. AF-2 can act as either flanger or, with the right setting, an analog chorus from the '80s.

Do I need all of those 14 pedals to sound good?
This pedalboard grows from a simple idea that I talked about in a past post about signal path. Essentially, it can be reduced to four aspects with one pedal for each "tone aspect": EQ, Modulation, Overdrive and Delay. However, as we grow in terms of musical taste and tone consciousness, we usually want more choices for each aspect that I mentioned before. I've been very fortunate and blessed to have all these pedals but if the pedalboard is reduced to only 4 pedals to represent each tone aspect, I can still survive.

If you are a beginner in the world of effects, I wouldn't suggest you to get 14 pedals at once; buy just one or two pedals for each of the tone aspects I previously mentioned and then slowly upgrade in the future. Don't buy the cheapest you can get, buy the ones that sound good; buying cheap low quality pedals will give you hard time in the future, trust me.

What pedalboard to choose?
I'm using Gator GPT-Pro 16" x 30" but to be honest it's better if you can build your own simple board because you can save a lot of money unless you want to buy something more fancy like Pedaltrain or other high end pedalboards.

Thanks for reading this post, I hope you enjoy it. Cheers and God bless :)

BYOC TRIBOOST

Hey everyone, I'm back with a new pedal called Triboost. It belonged to my friend Anthony Woen and I am very lucky to have this home-made clone pedal in my pedalboard for testing right now. It sounds awesome, it doesn't price too high and you can build it yourself and save some money.

BYOC
This company sells you ready-to-make clone pedals of well-known pedals such as Tube Screamer, Boss Chorus, etc. The company provides easy-to-follow instructions for assembling the pedals. Most of the pedals are not too hard to build even if you have a minimal experience in soldering. All of them feature true bypass switching and high quality components(ICs are usually good NOS chips!).

Three in one
This pedal is actually three boosters being made into just one pedal in a compact sized enclosure. It features three mode:
- Green: based on a generic MOSFET clean boost that is available around you. It adds a bit of dirt when you dial the boost a bit high.
- Blue: based on a linear booster. This is simply the cleanest among all three, doesn't add too much dirt and colors your tone minimally.
- Red: based on a Dallas Rangemaster boost. It uses NOS germanium transistor to achieve the Beano/Rangemaster sound. It has the most dirt compared to all and you can also adjust the boost frequency using the top rotary knob; you can choose from full, treble and mid boost on this mode.

This pedal intended to work strictly as a booster and not as an overdrive. If you expect this pedal to do an overdrive sound, you'll probably be disappointed. Use it as a booster on either clean or dirty channel and you'll immediately hear some classic boost sounds on each modes. Absolutely fantastic!

Worth the money?
I can't see why not! This pedal does work as what its advertised. A three in one booster is one of the rarest thing in the world. As long as you can solder neatly, you'll get a good quality pedals in your hand. There's a Canadian seller that sells BYOC pedals that are already assembled if you don't want to solder the pedals by yourself. This one is priced at $95.00 and you can buy it on BYOC website: www.buildyourownclone.com. An LPB will cost you around $40.00, MOSFET booster at around $100.00 and Rangemaster Booster clone at around $100.00; three of them separately cost $240.00 approximately and this Triboost only cost you $100.00.

From 0 to 10?
Depending on how good you build the pedal yourself. Nonetheless, it will be 10 if you do a great job. I recommend this pedal for a less expensive solution for finding a booster pedal.

Here's the sound clip of this pedal. Clean - MOSFET - Linear - Rangemaster Full - Rangemaster Treble - Rangemaster Mid. CLICK HERE for the sound clip.

Cheers and God bless :)

RC BOOSTER

Yes, it's finally here in the blog! The ultimate clean boost machine is now available for reviewing. After spending some time with this pedal, I'm finally able to share some cool stuffs that this pedal has to offer.

Xotic Tremendous Trio

First, let me explain the concept of Tremendous Trio by Xotic. The Tremendous Trio are actually three booster/overdrive pedals that Xotic has to offer: BB Preamp, AC Booster and RC Booster. You may wonder, what's the difference between the tree? They are all almost identical, they have similar control knobs and they're all booster pedals.

Well, they are in fact very different...

... in terms of gain level, sound characteristic and function. A cranked up RC booster will sound like a near-breakup vintage tube amp on a clean channel while an AC booster will deliver Tube Screamer like quality with more warmness; as we already know, BB preamp has the highest gain and can really drive an amp into a high saturation level. In terms of sound characteristic: RC booster is clean and smooth, AC booster is somewhat more mid-scooped compared to a TS and BB preamp have the most amount of warmness compared to the others.

RC Booster in more detail

I said above that RC Booster is clean and smooth: it's not just clean, it's TRANSPARENT. That means, you can use it as a clean boost to increase your volume level without adding gain or altering your tone. You can add some bass or treble depending on what you want but you can really keep your original tone as it is. This is very useful for a clean lead tone where you need extra volume boost.

Personally, I use the RC Booster only on the clean channel. When I tried to use it on an already overdriven amp, I can't really get a volume boost and I don't really need to get extra gain out of it. I once tried to use this as a tone modifier to make my single coil sounds warmer and it did a great job on doing that. Well, there's actually many ways that you can use this pedal to suit your needs. Leave it on all the time with minimum amount of gain and added level increase, it will help to bring out your long-cable-degraded tone back to life while boosting your tone.

Please remember

This won't give you a massive amount of distortion as I mentioned before, so don't really expect this pedal to work on a high-gain situation although it will still surely provide something useful in that case. This also doesn't work as a compressor although it can boost your output and add some sustain. Don't get disappointed when it doesn't provide you with enough gain and massive amount of compression, it's not really what it's designed for. Remember that there are AC Booster and BB Preamp that provide more compression and more gain compared to this baby.

Is it worth?

Current retail price of around $170.00, it's an expensive pedal for sure. But for its true bypass capability, boutique quality, tone enhancement features and unique functions, I would say that this thing worth every penny. Clean boost and tone enhancer is not really something that you may want, but give this pedal a try and you'll surely know why Xotic made this pedal.

From 0 to 10?

9.5. Cheaper price can bring it to 10 for sure. Xotic is a very expensive boutique pedal maker, but for a price this high you'll get something with a very high quality.

Sound clip: CLICK HERE, first original signal then RC booster with minimum gain maximum volume, and then RC booster maximum gain and volume, I backed off the treble a little bit by the way.

Cheers and God bless :)

XOTIC BB PREAMP

Let me start by saying that I am recently digging a lot of Andy Timmons' stuffs. I think he is one of only few guitarists that has great tone. Surely he plays great too (check out his new CD called Resolution)

What is it?

Okay, let's start. BB Preamp is actually a gain box that has unique characteristics. It's made by the Xotic. I use this pedal for sometime now as my primary gain box on my signal chain.

Let me talk about the sound that it can produce. This thing is capable of producing a super warm fat overdriven guitar tone that is similar to a vintage cranked EL34 based tube amps, let's just say an old Marshall. Not too much gain, but quite flexible gain control that can beef up your guitar tone while you're still running clean channel of your amp.

Another gain box? Something unique?

Let's just say almost everyone that chases tone knows Tube Screamer and what it does. Well, this is not a Tube Screamer wannabe; it's far from being called a TS clone. This thing maintains the transparency of your original tone and adds warmth and impressive amount of room to your signal. I tested this pedal using a basswood Ibanez equiped with Dimarzio Cruisers(bridge) at the neck and mid, and an AT humbucker at the bridge and it works very well on all position. The single coils get compressed tone with fair amount of treble, the humbucker gets a very sweet mid based overdriven sound with no muddiness at all.

What can I do with this pedal? What's the limit?

This thing is quite flexible, when you set the gain to a very low level, it will act almost like a clean boost, something that you can step to play clean leads without saturating your signal. If you put the gain at maximum, it will sound like a pushed crunch channel of a Marshall. It's NOT enough for metal music(I used to play metal years ago, so I know what kind of metal tone that people usually want), but if you put it in front of an already saturated amp, this thing will help your guitar to cut through the mix much easier.

Word of caution?

Beware, if you are NOT looking for extra mid on your signal or even try to cut the mid, this box will not do that job quite right. The nature of this box is to add extra mid to make warmness to your tone.

Anything else you need to know

This pedal is an IC based pedal. I believe it uses op-amp much like any other gain box in its range. It's not the one that has 12AX7 or germanium diode or whatever fancy stuffs, this is just plain IC based. It's meant not just to recreate vintage tone, but it's also going to help you get more fat warm non muddy tone that every lead guitarists want. However, if you're more interested in getting a vintage creamy fuzz sound from the sixties, I suggest check out pedals that has tubes or germanium diode in them. They'll have different feel than this box.

I personally disagree with the name "preamp". It should be BB Boost or something similar. Preamp doesn't usually come with true bypass :D...(I'm talking about TRUE true bypass, not just some true bypass, that should make you happy)

Power comes from 9V battery or the usual adapters such as BOSS and MXR.

Was it worth?

Talking about price, I got mine for $170.00. Pricey !!! But hey, it's worth every penny I spent. I personally use it side by side with an original TS808 so I can switch back and forth between two overdrive tones that I want. My personal favorite configuration: Bass 1 o'clock, treble 10 o'clock, gain around 3pm and the output will depend on your signal path but mine is set at around 9am and it already balances with the rest of my signal chain.

From 0 to 10

I give this pedal: 9.5....It will be 10 if it's bit cheaper, say in the price range of the usual TS or little bit more but not too much.

check out http://www.xotic.us

for sound clip MP3: http://dl.dropbox.com/u/12709731/sound%20demo/bb%20preamp.mp3

Hopefully you find this post to be informative, I will update if necessary. Otherwise, stay tuned for more reviews. CHEERS and God bless :)

p.s: if you are a truly Andy Timmons fan, go get the AT BB preamp limited edition, it's sold out already but if you check Mike Analogman's site, you'll find it there. Just google analogman :p....Oh, you can also get BB Preamp plus too, check it out, it's a twin BB preamp in one box.