UPDATE: JUST POSTED A NEW ORIGINAL SONG

Hello people, I was busy coming up with the follow up song for "Edge of the Mind". I spent the whole September to perfect my new song and ended up with a final version that I really like. The new song is called "Decisive", it is basically a Progressive Metal song with some experimentation of sound that I added in the song. I am particularly happy with how the rhythm turns out.

Apart from writing the song, the mixing was quite challenging. I have never dealt with so many tracks in one song before that I had to be extremely careful with the EQ and panning to avoid instruments clashing each other.

Talking about the gear being used, I am very happy with my new Ibanez GRX720 7 string guitar that I acquired earlier this year. I recently put DiMarzio D-Activator 7 string on the bridge as well as Blaze 7 on the neck and the change of tone is quite drastic to be honest and now it sounds very good for metal and rock. Palm mutings have never been this tight, sustain has never been this long; however, the pickups punches the amp way too hard and makes it distorts very easily so I have to back down the gain a little bit to avoid oversaturation.

I also used my beloved American Standard HSS Stratocaster on this record for the middle part of the song. It is still configured as it was previously with DiMarzio Virtual Vintage Heavy Blues 2 and AirZone.

Effects, I am using MXR Dyna Comp coupled with Boss CS-3 as well as Boss GE-7 and Boss NS-2 to get a very pronounced pick attack and then run them into my old trustee Radial Tonebone Hot British and BB Preamp in front of a clean Mesa TA-30. Delays and reverbs are coming from DAW plugins from Reaper.

Anyway enough talking, here is the new song:


I hope you enjoy this song and please help me to share this song to your friends. Cheers for now! God bless :)

Stay tuned for my next post soon!

RADIAL TONEBONE HOT BRITISH

Hello, today I want to talk about the Radial Tonebone Hot British tube overdrive pedal. While there are so many tube overdrive pedals out there in the market, apparently there are only a few that sound really good. This pedal happens to be one of them. Let's check it out.

The Spec
It contains a 12AX7 tube inside that produces most of the overdrive sound. There are so many knobs; a knob to control the output level, treble knob, bass knob, contour knob, drive and three voicing switches that controls the top end, the overall voicing and mid boost. Each of the switches had three different options, so you pretty much get wide variety of overdrive tone.

It comes with 15V adapter with more than enough power to accommodate the 12AX7 tube. It's also true bypass so if you turn it off it won't suck some power from your tone. The manual provides some helpful example settings that you can use as a starting point before you tweak the pedals.

The Sound
Extremely killer, life changer!!! This pedal can be used as your dedicated lead/crunch channel without changing your amp's channel. I used this pedal only on the clean channel of my amp and it does a wonderful job of providing high amount of gain to the amp. The knobs are extremely sensitive and they do provide so many options of tone that you can use to create whatever overdrive sound you have in your mind.

Turn the drive knob all the way down, the pedal will deliver you a hot Tube Screamer-ish kind of overdrive level, while turning it all the way up will deliver a super high gain Mesa Boogie lead distortion sound. It takes other overdrive pedals pretty well in front of it such as Tube Screamer or BB Preamp to add extra grit to your sound.

The Application
I highly recommend this pedal to those who only had single channel tube amplifier or an amp with bad sounding overdrive channel and needs to have a natural sounding amp-like overdrive that comes in a form of a pedal.

You can also use this on an overdrive amp that doesn't have an effects loop for your delay pedals. Set the amp clean, put the pedal in front of your delay pedal and you can have a natural sounding delays without the need of having FX loop.

I, however, do not recommend this pedal if you are going to use this on a solid state amp, I tried it with an Ibanez 5 Watt amp and it sounds like a total piece of garbage. Also, if you want to use it to boost a tube amp with a great overdrive channel, this might not going to impress you that much(although it can and it sounds good) because you can get a very decent overdrive pedal that sounds as good for cheaper price.

The Maintenance
Tube needs to be replaced once every few years depending on how often it's being used. Also, you have to let the tube warm up before you can switch it on, meaning that it has to be off when the power supply is connected and you have to wait for like 3 minutes or so to prolong the tube life.

Is it worth the money?
$230 is the normal price on the market, you can get it very close to $200 on some stores. I say this is worth it if it's applied the right way(see "The Application" above).

From 0 to 10
Obviously 10.

Sound Clips
Andy Timmons Tube Driver style overdrive
John Petrucci Mesa Boogie Mark style distortion
Warm Tube Screamer-ish overdrive

Hope you enjoy the post, cheers and God bless :)

MY CURRENT PEDALBOARD

Hello everyone, I want to share my current pedalboard that I use for practicing, recording and experimenting. It's actually a bit too big for me to carry during a gig, so I mainly use it only at home and I connect it with my Mesa Transatlantic TA-30 amplifier.

Signal Path
From guitar to Mesa TA-30 amp:
Boss GE-7 Equalizer, CAE MC404 Wah, EHX Micro POG, TC Polytune, EHX Doctor Q Envelope Filter, MXR Dyna Comp, EHX Worm, Ibanez AF-2 Airplane Flanger, Maxon OD9 Silvermod, Radial Tonebone Hot British, RC Booster, Morley Volume Plus.

On the FX Loop:
Boss DD-3, EHX Deluxe Memory Man.

Most of the pedals are powered by the 9V Visual Sound One Spot with the exceptions of Radial Tonebone, Deluxe Memory Man and EHX Worm.

Philosophy of my pedalboard
The general idea of this pedalboard is to be able to cover all kinds of popular effects that you usually hear on any guitar oriented music. Doctor Q can do some envelope filter funk songs, while Worm can deliver phaser,  trem and vibrato. On the other hand, OD9 can deliver some bluesy low gain overdrive tone while the Hot British can be cranked up to a very high gain John Petrucci crunch tone. The RC Booster acts as a transparent volume boost, more like a master volume rather than a gain box. MC404 wah can give you either a bright funky wah tone or a warm lead waht tone with a flick of a switch. Deluxe Memory Man will give you a rich dark analog delay tone while the DD-3 can cover more straight forward digital delay tone. AF-2 can act as either flanger or, with the right setting, an analog chorus from the '80s.

Do I need all of those 14 pedals to sound good?
This pedalboard grows from a simple idea that I talked about in a past post about signal path. Essentially, it can be reduced to four aspects with one pedal for each "tone aspect": EQ, Modulation, Overdrive and Delay. However, as we grow in terms of musical taste and tone consciousness, we usually want more choices for each aspect that I mentioned before. I've been very fortunate and blessed to have all these pedals but if the pedalboard is reduced to only 4 pedals to represent each tone aspect, I can still survive.

If you are a beginner in the world of effects, I wouldn't suggest you to get 14 pedals at once; buy just one or two pedals for each of the tone aspects I previously mentioned and then slowly upgrade in the future. Don't buy the cheapest you can get, buy the ones that sound good; buying cheap low quality pedals will give you hard time in the future, trust me.

What pedalboard to choose?
I'm using Gator GPT-Pro 16" x 30" but to be honest it's better if you can build your own simple board because you can save a lot of money unless you want to buy something more fancy like Pedaltrain or other high end pedalboards.

Thanks for reading this post, I hope you enjoy it. Cheers and God bless :)

MESA BOOGIE TRANSATLANTIC TA 30

Hello everyone, today I want to talk about Mesa Boogie Transatlantic TA-30. A little background, Mesa Boogie is very known for its very high quality high end guitar and bass amplifiers and cabinets. Some of its successful amplifiers are now being used by high profile artists such as John Petrucci, Mark Tremonti, Andy Timmons and many others. 

The history of Mesa Boogie starts way back from around early '70s when Randall Smith started his job as a repairing technician for guitar amplifiers. He modified amps that was available during that time by "hot-roding" the amp with an extra tube on the preamp section of the amp to achieve a high gain sound that was not easily available during that time. Since then, he started building his very own guitar and bass amps that come in different tones, output power and size.

Transatlantic TA-30

Mesa Boogie is very well known for its reputation on making high gain amp, but those people working there want to show the world that they can also make amps that can do some great stuffs on lower gain settings; this is the main purpose of TA-30. This amp does so many great clean and break up tones, but you can always crank it up to get that mid gain tone out of this amp. This amp is also on the portable side of amplifiers, means that the head version of this amp is pretty small and light enough for you to easily carry it on any gig.

Technical Detail

I have the head version, it features 4xEL84 tubes, 6x12AX7 tubes, a special output transformer, Effects Loop, Reverb circuits for both channels, independent EQ for different channels, independent Reverb and FX Loop setting on different channels, independent output power level on different channels and some push-pull knobs. The EQ settings are consisted of Bass and Treble without any option to adjust the Mid.

You have two channels:

Channel Green, you can choose between "Normal" clean tone and a British sort of like Vox AC "Top Boost". When cranked up, the Clean tone will deliver an almost break up tone but still on the clean side while the Top Boost tone will start to get saturated. This channel EQ includes a Cut knob to remove some high end sizzle; the knob can be pulled and it starts to act as a Master Volume with pre-fixed amount of "cut".

Channel Red, you can choose between "Tweed" for American Fender clean tone, "Hi 1" for British mid gain tone, and "Hi 2" for Mesa's signature mid gain tone. When cranked up, Tweed will give you an almost break up tone with just a hint of dirt. Hi 1 will deliver Marshall-like mid gain tone when cranked up with enough sustain but not very saturated. Hi 2 will sizzle when cranked up and it will sound pretty good when you do lead stuffs.

All the channels have individual tone control as well as power selection of 15, 30 and 40 Watt. The 15 and 30 Watt power level will give you class A tube tone at different volume and headroom level. The 40 Watt power level will deliver class AB "Dyna-watt" tube tone with extra juice that can enhance your playability and tone.

My opinion

It's a super great amp!!! I personally like the clean channel on Normal mode with some added treble. With the help of its built-in Reverb, you can get so many great classic clean tone that can cover many ground of music styles. I also like the Hi 2 mode on the Red Channel and I usually roll down the treble to get that fat warm tone; I add my BB Preamp in front of the already cranked amp to push it harder and make it sound like a mid/high gain amp that doesn't fuzz too much and still retain the integrity of the original tone. 

You can add any pedal in front of it or on the Effects Loop if you need to use the FX Loop. It works well with all of my overdrive pedal and it projects the delays from my delay pedal nicely. I use a Mesa Mini Recto Cab as my cabinet and it works well especially on Hi 1 mode. 

Is it worth the price?

Nothing bad to say except its sky-rocket-high price. But I say it's worth it, the overall quality of the amp is very good and it's very well built. My personal experience with this amp has been very great, it delivers what it says on the brochure and on the internet.

From 0 to 10

10. Maybe even higher than 10, this is really one of the best amp I've ever tried.

Here's some sound clips. I used my PGM30 with DiMarzio AT-1 and Cruiser Bridge. I record the sound from the amp using Radial JDX Amp DI.

DIRTY

CLEAN

I hope you enjoy this post. Cheers and God Bless :)

Stay tuned for more reviews :)