BASIC TIPS FOR GETTING THE RIGHT TONE

I can't get that guy's tone!! What on earth is wrong with my expensive gears???

Frustrating isn't it? You have all the nice pedals and what you think the best guitar on this earth and you still can't get your desired tone. You keep asking what's wrong with your setup, you got all the most expensive gears and you wonder why they don't make any good sound. Lots of people have been there before and today I want to share my perspective of basic guitar tone guide.

First thing first

Let's analyze all the factors that count toward the creation of your tone. Before we even do that, this is what I basically will do: ask yourself, what kind of sound are you aiming for? The best way to determine what kind of sound do you want is basically by having some references. It could be your guitar hero, your friends' tone or some guitar sound that you had heard before in your life.

Your guitar

After you answer that question, lets's start with the very first thing that you have to observe: your guitar. You can't nail Slash's signature sound using a Fender Stratocaster with single coil pickups. You can't nail Stevie Ray Vaughan's tone using an ESP loaded with EMG pickups. You can't play Metallica songs using a Telecaster.

Getting the right type of guitar will cover 50 to 90% of your tone. This is generally true, as long as your tone does not require huge amount of effect processing. Here are some of the famous guitar tones that are usually being used by guitarists everywhere:

1. Stratocaster sound: bright and clear, can be achieved using any guitar with single coils and ash/alder/basswood body.

2. Telecaster sound: super bright and twangy, can be achieved using Telecaster guitars with Telecaster pickups.

3. Fat humbucking tone: fat, round and warm. Can be achieved using anything with humbucker or P90 pickups regardless of the body type. Generally people will use a Les Paul with mahogany body but anything can do.

4. Jazz tone: similar with no. 3 but you can also use a semi-hollow guitars to get this beautiful tone.

Your signal path: Amp and Gain Box

You must choose your gear carefully to nail a desired tone. Not every nice pedal and expensive amplifier on this planet will do the trick. If you want a straight forward rock sound from the '70s and '80s, use a tube amplifier that's capable of producing a medium amount of overdrive and if you need an extra push, use a Tube Screamer. Using a hi-gain amplifier won't produce your desired tone. Adding a high-gain distortion pedal on a clean amp will also not work best.

If you're trying to nail heavy metal sound, use a Hi-Gain amp with medium overdrive setting and push the amp a bit harder using a gain box with a small amount of gain. You can also use a cleaner amp that's being pushed with distortion pedal as long as you cut the mid a little bit.

For a more classic Hendrix tone, use germanium fuzz pedals, they can replicate a vintage cranked up Marshall with fuzz face pedal.

Experiment a little bit in your local guitar store with some amplifiers and/or gain boxes. I suggest to start by hearing from well known brands such as Marshall and Fender for amplifiers and Tube Screamer TS-9 or 808 by Ibanez/Maxon for the gain box. If you know what you want, you don't have to buy those stuffs, there are lots of cheaper alternatives that you can search on the internet or by asking to someone; they will recreate your desired tone and they sound almost as good as the big names.

Other stuffs in your signal path: time based and modulation

Delay, Reverb, Chorus, Wah, Flanger, you name it...not everyone use them in their rigs and you have to be careful about choosing them. Guitarists tend to buy expensive stuffs but they don't really utilize them to the fullest; I personally use two delay pedals(one for short and one for long), a reverb and a chorus.

I won't suggest to overly use these effects since it will kind of ruin your original tone. Keep them as subtle as you can. Most guitar heroes don't over use them as well they wan't to preserve their original tone.

The thing that matters the most

Ultimately, no matter how good your gear is, you need to practice hard too! If you are currently aiming someone's tone, it's good to learn some tricks that the person usually do because the techniques are sometimes influenced by the gears.

I once fell into the trap of thinking that hi-gain can be used anywhere. It's so easy to play in highly distorted amp and I thought it sounds good. Once I heard how terrible it sounds, I immediately change my tone to further fit the style that I play. It uncovers all the bad habit that I usually do when I used hi-gain settings, but with practice, slowly you can develop your skill while at the same time improving your tone. It worked pretty good on me and my friends, so it should work for you too!

I hope this post would help you! Feel free to share it with everyone.

Cheers and God bless :)

SIGNAL PATH 101

Hi everyone, today I want to discuss about the so-called "GENERIC SIGNAL PATH" for guitar. Signal path is basically all the stuffs that are between your guitar and your amp or speaker or earphone or whatever device that will generate the sound. Let it be your preamp, your wah, your volume pedal, your FX pedals, your booster, your loop, your switching boxes, they're all part of the signal path.

There is no scientific rule about how to arrange your pedals

People had thousands of different configuration on their pedalboard. Some prefer certain pedals on a spot, others prefer same pedals on different spot. That really depends on a person's need and how they want their signal to sound.

What you need?

The first step on figuring out how to setup your signal path is by knowing what you need. These are what people usually need:

- at least one 'Gain Box' (Distortion, Overdrive, Boost or Fuzz)

- at least one 'Modulation' (Chorus, Flanger, Univibe or Phaser)

- Compressor

- Wah pedal

- at least one 'Time Based' (Delay or Reverb)

- Volume pedal

People go with rack-mounted effects for its superb control, but now stomp boxes are popular again. I'll go explain how I setup my stomp boxes, it's pretty general and you can apply my explanation to rack-mounted effects.

My signal path

On the input plug

Guitar -> Wah -> Overdrive -> Amp

On the FX loop

Send -> Boost -> Volume -> Chorus -> Delay -> Reverb

This is the most generic setup that you can find. You can replace the volume pedal out of the FX loop into the very beginning of the signal path to make it act like your guitar volume knob instead of making it acts like a master volume control. Some artists put wah pedal after distortion to get more extreme wah sound. Chorus or flanger can be put before or after distortion out from the loop to get more wobbly sound.

FX Loop

One thing that I should point out is the fact that I had a preamp pedal that acts as my amp and cabinet simulator. It has the send/return plugs for FX Loops which means you can put some boxes there that you don't want to get mixed with other pedals that you put before the amp. Usually you put delay/reverb pedal on the loop to avoid those pedals from getting affected by the increased gain signal from the overdrive or distortion pedal.

If you don't have FX loop, you can just put everything before the input of the amplifier or preamp. It will sound a bit different and some pedals might not be able to tolerate the amount of gain increase caused by gain boxes on the beginning part of your signal chain. If you do run into this problem, there are some loop boxes available to be placed right before your amp and it will have send/return option for your pedals.

Try to experiment as much as you can

You can start from the most generic signal path that I explained above, but ultimately there is no correct option of placing your FX units. Try to research different setup and see if you can find the best setup for the tone that you're looking for. Pay attention to your pedal requirements as well, sometimes a pedal doesn't want to be placed before of after a specific pedal because it might damage the unit.

That's all for now, I hope you enjoy my post!

Cheers and God bless ! :)

A TILTED VOX AMP AND AN ARMOR ALL SPRAY

One thing about tone chasing: it's endless, just like trying to chase your own tail and it will drive you crazy, both physically and financially. You will surely get better tone and you will learn so much about your guitar by doing that, but what matters the most is your final result.

It's good to make significant changes sometimes, for example upgrading from a cheap solid state amp into a fully loaded tube amp, or maybe replacing a tone-coloring pedal with something more decent. But trying to exhaust yourself trying to find a perfect tone is not going to happen quickly and in exhaustive way.

If you are concerned about the way your signal chain sounds, you should first worry about how you play your guitar. Observe basic simple techniques that will beautify your guitar playing. A player who makes great vibrato with a $85.00 Walmart Strat plugged into a cheap practice amp will still sound so much better compared to a player who tries to mask his bad technique using a $3000.00 guitar using exotic woods plugged into an echoplex that's connected to a Vintage Modern Marshall.

I want people not to get obsessed with gears but to get obsessed trying to make their playing to sound great. Guitar playing is not all about live action coolness or bragging expensive rig, it's more about how you put beautiful compositions into someone's ear.

Even the King of Tone himself said the same thing haha !

Cheers and God bless :D !